- Posts: 13579
- Joined: Thu Aug 23, 2012 10:42 pm
Mon Feb 15, 2021 11:24 am
If you use the lineups page on DD, you may have noticed that some data is now wrong on some of the cards. It was put in correctly at the time, but The data is correct on the card reader page. I've noticed the 5m Don Baylor and both Frank Howard cards are wrong.
This appears to be an issue with older cards.
Adrian said:
"Now, when we started crowd sourcing card entry, I came up with a form that used short names SI, SI*, SI**, DO, DO**, TR, HR, etc. I did not bother with every permutation of SINGLE(cf), SINGLE(rf), SINGLE(lf), etc.
When adding new cards, this is not an issue. However, old cards still had the long names (e.g. SINGLE(cf), not SI, SINGLE**, not SI**, etc.) If one were to try to Submit an old card, there would be gaps in the values. So, even though "SINGLE(cf)" is stored on the card in the 7 slot and appears in the card image, the form would submit a blank where the "SINGLE(cf)" was.
Table 2 would get updated with incorrect raw hits. Meanwhile, the card values are still preserved in table 1, so the card reader is correct, but pool and lineups are off because table 2 is wrong. "
Adrian told me how to fix each card. IF YOU NOTICE OTHER CARDS with errors on the lineups page, let me know which cards so I can try to fix them.
Thanks!
This appears to be an issue with older cards.
Adrian said:
"Now, when we started crowd sourcing card entry, I came up with a form that used short names SI, SI*, SI**, DO, DO**, TR, HR, etc. I did not bother with every permutation of SINGLE(cf), SINGLE(rf), SINGLE(lf), etc.
When adding new cards, this is not an issue. However, old cards still had the long names (e.g. SINGLE(cf), not SI, SINGLE**, not SI**, etc.) If one were to try to Submit an old card, there would be gaps in the values. So, even though "SINGLE(cf)" is stored on the card in the 7 slot and appears in the card image, the form would submit a blank where the "SINGLE(cf)" was.
Table 2 would get updated with incorrect raw hits. Meanwhile, the card values are still preserved in table 1, so the card reader is correct, but pool and lineups are off because table 2 is wrong. "
Adrian told me how to fix each card. IF YOU NOTICE OTHER CARDS with errors on the lineups page, let me know which cards so I can try to fix them.
Thanks!